Fixing Your Leaky Compression Faucet
Follow The Steps Below If You Have A Leaky Compression Faucet
A leaky faucet may not seem like a big deal, but leaving the problem unresolved can actually cost you thousands of dollars in wasted water. A leaking faucet is actually relatively easy to fix, so you don't have to let it keep dripping all day long. Follow the below steps if there's a leaky compression faucet somewhere in your home in Jacksonville, FL.
1. Shut Off the Water and Plug the Drain
Check the pipes underneath your sink for a handle or set of handles that you can use to shut off the water flow to this specific faucet. Next, plug the drain so you don't have to worry about losing any screws or washers in the pipes while you're working.
2. Remove Both Handles
Compression faucets have two separate handles to control hot and cold water flow. You may need to pry off the caps that label each temperature before you unscrew the handles.
3. Check the Seat Washer
Worn out rubber on the seat washer is a common culprit for a dripping faucet. To check this, use a wrench to remove the nut. Next, pull out the stem to expose the O-ring. This sits on top of the seat washer. Remove this as well to check.
4. Replace the Seat Washer
There isn't much you can do to remedy a leaking faucet with a worn-out seat washer. Your best course of action is to simply replace it. Since these parts can vary in size, you may want to bring the worn-out seat washer to the hardware store to use as a reference.
5. Reassemble the Sink
After you replace the seat washer, you can start to reassemble the rest of the faucet. Just work backwards from before. Now you have a fixed leak.
Don't let a leaking faucet add thousands of dollars to your water bill, especially when the home remedy is so simple. If the above technique didn't work for you, double check to make sure your faucet is actually a compression faucet and not some other type of appliance. Contact flood remediation experts for additional help if you're still having issues.